Random good picture Not show

1 This produces a smooth, circular arc between the lines.

2 Now the problem was soloed by using circular arc lathe tool model and specially designated technology.

3 The armrest of horn of circular arc edge is tie-in aeruginous wood door, stair of ceramic tile inlaid is tie-in ivory metope,(www.Sentencedict.com) natural Mediterranean wind.

4 A circular arc fixed plate has the angle scale, and one side of the circular arc fixed plate is prolonged as the caliper head which provided with two cylindrical pins.

5 In the design of circular arc slipway. the docking and launching problems on longitudinal circular arc slipway for large vessel are successfully solved.

6 The circular arc of the ground is sunken enter 2 centimeters, when washing bath, water wets week exclosure face not easily.

7 Secondly, analysed the approach model, described circular arc approximation method, approaching blade curved surface with this method and realized raise of the approach speed.

8 Circular interpolation of time-sharing algorithm is that circular arc is approached with tangent or chord line.

9 Indexing, edges face the modelling of circular arc form, with the ears, exalt cooker traditional aesthetic habit, it looks like the soft and powerful, is kindness.

10 Computing result indicates that quasi transverse circular arc gear is basically equal on strength distributing along tooth depth direction and it is superior to normal plane circular arc gear.

11 The paper briefly introduces circular arc sciagraphy and how toapply it to graphic expression of parts whose basic configuration is solid of rotation.

12 Overlap the shaping rollers' circular arc excessively, decrease partial betweenthe shapes excessively as far as possible, it will benefit to briquette better.

13 The circular arc shaped pavilion supported by steel columns seems to be a boat advancing against the waves.

14 It includes the calculation of pure circular arc profile of the planetary gear by least square method, model design, model performance test and relevant analysis.

15 It has solved in between the circular arc plan algorithm efficiency and the precision contradiction. It is a high efficiency, and a high accuracy arc plan algorithm.

16 The diagram is a cross section of the bowl blank with the desired circular arc superimposed.

17 The ejection mechanism used pin ejector to pull the plastic parts out with move slanting slide simultaneously leaving circular arc concave position. The ejection mechanism is simple and practical.

18 The transmission part is an involute gear, and the working part can adopt different working faces, such as a cylinder excircle face, a circular arc tooth or an involutes tooth gear top cavetto.

19 According to the drilling design and the principles of wellbore track formation, the three intercalation models -cylindrical spiral, special circular arc and natural parameters - were figured out.

20 In order to reduce the probability of failure, the influence of a gearwheel with staggering tooth on the meshing stiffness of gear with double circular arc was investigated.

21 What differ with general sole is, the beat side beetle-crusher foot gives a circular arc.

22 This thesis introduces the method of optimal design for the circular arc transition radius of the shaft collar of a circular shaft with ANSYS, which has an important use value in engineering practice.

23 Tangential continuity [C1 or G1] is the next level, defined by a circular arc creating a relatively smooth transition between these surfaces.

24 This article introduced one kind of entire station survey meter, together with the CASIO series programmable calculator, which carries on to the tunnel circular arc curve is surveys.

25 Castellated members are formed by cutting H-section steels in a zigzag or circular arc pattern along its centerline and then rejoining the two halves by welding makes.

26 It also testifies that the shape of potential failure surface can be circular arc, straight lines, or combination of them. Finally, more effective searching strategies are discussed.

27 It has not been resolved to set on closing in on the circular arc with the method of minimum Squares until now.

28 This paper deals with the engagement of gears with circular arc profile in normal plane at the presence of errors on center distance and depth of cut.

29 Using the theory of standing wave, the writer has studied the spread of a rapid flow on the surface of the circular arc and derived tae formula of the wave angle, and the expanding angle.

30 The structure parameters have some relation with the vibration behaviors for the reducing box with two stage split flow Novikov gear of with double circular arc tooth profiles.